Exists a a possibility to change the floor of a house and avoid having to take out debris.? Very simple, placing vinyl floor tiles, one of the best resources when you want to place pavement on top of another already existing. Vinyl floors tiles are quite innovative and modern. They are fabricated in PVC and have good characteristics such as resistance and flexibility. It is The Simple and Quick Method of Improving Your Floors
Originally produced as an alternative to linoleum, vinyl tile grew in popularity because it was colorful, easy to clean and crack resistant.
Vinyl flooring remain popular today and are commonly installed in baths, foyers, laundry rooms and mudrooms. The 12×12-inch tiles come in dozens of colors, patterns and textures, making it easy to create checkerboard designs and floors with contrasting borders.
This class of vinyl floors is easy to install and they can be placed on top of another floor. They are distributed in tiles or in plates and their principal advantage is that they are impermeable and very easy in terms of maintenance and cleaning.
Installing vinyl floor tiles, is an excellent way to enhance your home’s beauty while adding value.
Advantages of Vinyl Tiles
Vinyl tile is favored over other kinds of flooring materials in high-traffic areas because of its low cost, durability, and ease of maintenance. Vinyl tiles have high resilience to abrasion and impact damage and can be repeatedly refinished with chemical strippers and mechanical buffing equipment. If properly installed, tiles can be easily removed and replaced when damaged.
Vinyl Tiles are available in a variety of colors from several major flooring manufacturers. Some manufacturers have created vinyl tiles that very closely resemble wood, stone, terrazzo, and concrete. Tiles can easily be cut and assembled into colorful and decorative patterns.
Different Types of Vinyl Tiles
There are two types of vinyl floors: Glue-down and self-adhesive.
–Glue-down tiles are set into a bed of mastic, which is a rather messy process.
-Self-adhesive vinyl tiles are a peel-and-stick product, making them ideally suited for do-it-yourselfers. The self-adhesive tiling does not require glue and is easy to install, since the reverse of these tiling have an adhesive covered with a layer of paper that can be taken off. You can remove the paper and glue the tiling to the floor.
Steps to follow in the placement of Vinyl Tiles
The vinyl tiles installation require certain materials: a large square, tape measure, a scraper, a cutter and glue. The floor must meet certain requirements so that we can set the vinyl tiles: must be healthy and firm, without cracks or loose tiles, must be flat and smooth.
Once the room is cleaned, do the following:
Place the first vinyl tile in the center of the room. Aid yourself with a squad since it will help you to place the tile in the proper place and totally straight. Then mark on the floor the shape of the tile with a pen. With a scraper, apply the mounting tail very well extended and place the tile on top of it.
Continue gluing the tiles, but be very careful to not leave any holes or spaces between them. It is also important to avoid any bubbles while placing them and of course, you should never step on them since you will run the risk of disposition them or reduce them from their original place.
When you reach to the wall, you must cut the vinyl tile using a special cutter for it.
vinyl asbestos tile – vinyl tile installation – vinyl floor tile installation – vinyl tiles installation – vinyl tile installation cost – rubber flooring – vinyl prices – commercial vinyl flooring – commercial vinyl – vinyl over tiles – luxury vinyl tile – viny bathroom floor – rubber floor tiles – vinyl tile flooring installation – how to install vinyl tile – viny tile designs bathroom – how to lay vinyl tile – cheap vinyl floor – vinyl flooring tiles installation – vinyl peel stick – stick flooring
Originally posted 2014-06-13 03:54:42. Republished by Blog Post Promoter